Water Sharpening Stone NANIWA Traditional Stone 1000

SKU: 040090

(0 Reviews) | add rating

The Traditional series from Naniwa is the ideal entry-level series. Inexpensive and yet of high quality, which is known from Naniwa. The abrasion of these stones is slightly higher if you use them for very hard knife steel. Before sharpening, the stones should be soaked in water for a few minutes. For best results, the stone should be cleaned and flattened regularly.

Synthetic water sharpening stone
Grit: 1000
Use: Fine grinding
Material: Clay based
Dimension: 210 x 70 x 20mm
Made in Japan

27,90 €

incl. 19% VAT , plus

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Manufacturer data

"Water Sharpening Stone NANIWA Traditional Stone 1000"

For the production of really good grinding stones a lot of experience is necessary. Detailed knowledge of stone types and sediments is just as much a prerequisite as craftsmanship in the processing of the stones. In order to achieve the desired high quality, the combination of suitable materials must be precisely determined. During the firing process of the grinding stone, the correct temperature and humidity are also important in order to give the grinding stone the desired hardness. Our grinding stones come from renowned manufacturers from Japan, which were recommended to us by our cutlers.

Water Grinding Stones and Accessories from Naniwa

Naniwa Abrasive was founded in 1952 in Osaka, Japan, and is one of the best and most famous manufacturers of grinding stones in Japan. Naniwa's abrasive stones are characterized by their high hardness and short preparation time. The regular quality control at Naniwa ensures a high and constant quality standard. There are many professional sharpening services worldwide and many more knife lovers who use Naniwa sharpening stones. Naniwa knife sharpening stones can be used to sharpen knives made of Damascus steel, carbon steels such as blue paper steel Aogami, white paper steel Shirogami, AUS-8, Japanese stainless steel but also European stainless steel.

Care

Clean from time to time, for example, with cleaning stone Nagura. Flatten if necessary. Wash thoroughly after each use and allow to air dry.

Grain size:	1.000 (JIS-Japan)
Grain size range:	Up to 1.000
Dimensions:	210 mm x 70 mm x 20 mm
Material:	Based on clay
Knife accessories Product type:	Sharpening accessories Sharpening Stone
Care:	Wash up Smooth if necessary
Grinding stone type:	Single sharpening stone
Usage:	Pre-grinding Fine tuning

There are no reviews yet.

Review Information

Naniwa

If you're looking for one of the most renowned and best manufacturers of Japanese sharpening stones, then NANIWA is the right choice. The high hardness of NANIWA sharpening stones, and especially their short preparation time, set these stones apart. A high, consistent quality standard is ensured through regular inspections. It goes without saying that a lot of experience and detailed knowledge of stone types and sediments are prerequisites for the production of these sharpening stones, as well as manual skill. NANIWA was recommended to us by our knife smiths, and we are happy to offer you a wide selection of different sharpening stone combinations.

Herstellung

The production is carried out under high quality standards and controls. To ensure consistent quality, the combination of the right materials must be precise. The correct temperature and humidity during the firing process are also crucial for the stone to achieve the desired hardness. Use NANIWA sharpening stones for sharpening: knives made of Damascus steel, carbon steel (such as blue paper steel Aogami or white paper steel Shirogami), AUS-8, Japanese stainless steel, or even European stainless steel.